Oil & Gas Pipe Welding
Pipeline and process-pipe welding for oil, gas, and industrial plant across Ghana — root, fill, and cap runs by qualified welders, NDT-inspected, on qualified procedures, on site or in our workshop. Welders Ghana, Takoradi to Tema, for over 15 years, priced on a survey.
Pipeline and process-pipe welding for oil, gas, and industrial plant — root, fill, and cap runs by qualified welders, NDT-inspected, on qualified procedures, on site or in our workshop. Welders Ghana has welded pipe across Ghana’s industrial belt for over 15 years. Call +233 27 011 3729 — tell us the line and service and we will arrange a survey.
Why Qualified Pipe Welding Matters
A pressure-carrying pipe joint is not finished when it looks welded — it is finished when it passes inspection. Oil, gas, and process lines fail at the weld, and they fail expensively: a leaking tie-in, a porous root run, a joint that never met the procedure. Welders Ghana welds pipe to qualified procedures, by welders qualified to ISO 9606, and inspects the result — so the line is traceable, documented, and built to carry what it is meant to carry.
Pipe Welding Systems We Build
Pipeline & Transmission Welding
Cross-country and in-plant pipeline joints — bevelled, fitted true, root-fill-cap to a qualified procedure, for oil, gas, and water transmission lines.
Process & Plant Pipework
Process pipe, manifolds, headers, and spools for refineries, terminals, and industrial plant — prefabricated in the workshop or welded in place at site.
Tie-Ins, Hot Spools & Repairs
Tie-in welds, replacement spools, and repair of leaking or rejected joints — cut out, re-prepped, re-welded to procedure, and re-inspected.
NDT-Inspected Joints
Welds backed by non-destructive testing — radiography, ultrasonics, dye-penetrant, or magnetic-particle — with results recorded for traceability.
What We Weld & Inspect
| You need | What we do |
|---|---|
| New pipeline / transmission line | Bevel, fit, root-fill-cap to qualified procedure, NDT |
| Process / plant pipework | Spool fabrication or in-place welding, inspected |
| Tie-in or hot spool | Cut, prep, weld to procedure, re-inspect |
| Leaking / rejected joint | Cut out, re-prep, re-weld, re-test |
| Documented handover | Welds, welders, procedures, and NDT results recorded |
How We Weld Oil & Gas Pipe
- Survey, drawings & procedure — material, thickness, and service agreed; welded to a qualified procedure.
- Prep, fit-up & root run — bevelled, aligned, root gap set, root run by welders qualified to ISO 9606.
- Fill, cap & inspect — fill and cap to procedure, then visual plus NDT where the joint calls for it.
- Document & hand over — welds, welder, procedure, and inspection results recorded and handed over.
Standards & Compliance
- Welder qualification to ISO 9606 and welding quality management to ISO 3834 — qualified people, controlled process
- Pressure-pipe joints welded to qualified welding procedures following recognised pipe-welding practice, with documented method and acceptance — not improvised
- Non-destructive testing — radiography, ultrasonics, dye-penetrant, or magnetic-particle — on the joints that require it, with recorded results for traceability
- Over 15 years in the trade — a real workshop with qualified welders, not a roadside operation
What It Costs
Oil and gas pipe welding is not a flat per-joint price — it depends on pipe size and wall thickness, material grade, the number of joints, the level of NDT required, and whether the work is on site or in the workshop. We price it on a survey of the line and the drawings, and give you a firm scope and quote — never a guess down the phone, and never the lowest-bid corner-cut that fails inspection.
Pipe Welding Across Ghana
We weld pipe across Takoradi, Tema, Tema Industrial Area, the Accra industrial belt, Kumasi, and the Western Region oil-and-gas corridor — at terminals, plants, yards, and on cross-country lines. We mobilise qualified welders and equipment to your facility, or prefabricate spools in the workshop and weld them in at site.
Areas We Serve
Welders Ghana welds oil, gas, and process pipe across Takoradi, Tema, the Greater Accra industrial belt, Kumasi, and the Western Region. On-site and workshop, for over 15 years.
Related Services
- On-Site Welding — qualified welders mobilised to your plant or yard
- Pressure Vessel Welding — tanks and vessels to code-style practice
- Certified Inspection — NDT and weld inspection, documented
- Welding Cost Guide — what drives the price, and why we survey
Frequently Asked Questions
Do you weld to qualified procedures for oil and gas pipe? Yes — pipeline and process-pipe joints are welded to a qualified welding procedure by welders qualified to ISO 9606, with material grade and wall thickness agreed before work starts. We do not improvise pressure-carrying joints.
Can you do NDT on the welds? Yes — beyond visual inspection we arrange radiography, ultrasonics, dye-penetrant, or magnetic-particle testing on the joints that require it, and record the results so the line is traceable.
Can you weld pipe on site at our facility? Yes — we mobilise qualified welders and equipment to your plant, terminal, or yard for tie-ins, repairs, and new runs, or prefabricate spools in the workshop. We cover Takoradi, Tema, and Accra.
How much does oil and gas pipe welding cost? It depends on pipe size, wall thickness, material, the number of joints, and the NDT required — so we price it on a survey of the line and drawings, never as a flat per-joint rate down the phone.