Mining Equipment Fabrication
Worn buckets, cracked crusher frames, failed wear plate, a broken chute or screen — Welders Ghana repairs, hardfaces, and rebuilds mining and quarry plant across Ghana, on site where it matters to cut downtime, priced on survey. For over 15 years.
Worn buckets, cracked crusher frames, failed wear plate, a broken chute or screen — Welders Ghana repairs, hardfaces, and rebuilds mining and quarry plant across Ghana, on site where downtime matters, for over 15 years. Call +233 27 011 3729 — tell us the plant and the failure and we will arrange a survey.
Why Mining Plant Repair Is Different
In a mine or quarry, a stopped machine is lost production every hour. Buckets, wear plate, crusher liners, chutes, and ground-engaging tools wear and crack under constant abrasion and impact — and the high-strength and abrasion-resistant steels they are built from crack if welded with the wrong procedure or the wrong rod. Welders Ghana repairs, hardfaces, and rebuilds this plant to a documented procedure by welders qualified to ISO 9606, on site where downtime demands it, so the machine goes back to work instead of sitting in a yard.
Mining & Quarry Equipment We Repair
Buckets, Wear Plate & Ground-Engaging Tools
Worn bucket lips, sidewalls, and teeth, and failed wear plate and liners — rebuilt and hardfaced to take the abrasion again instead of being scrapped.
Crushers, Screens & Chutes
Cracked crusher frames and jaws, worn liners, broken screen decks, and worn-through chutes and hoppers — crack-repaired, rebuilt, and hardfaced where they take the worst wear.
Structural & Plant Steel
Cracked frames, booms, hoppers, and conveyor structure repaired to recognised structural practice — square, true, and properly welded, not tacked back together.
On-Site Repair & Hardfacing
Mobile welding brought to the mine or quarry so a component too big or too costly to remove is hardfaced or crack-repaired in place — the fastest route back to service.
What We Repair & Hardface
| You have | What we do |
|---|---|
| Worn bucket / teeth / wear plate | Rebuild lost section and hardface to take abrasion again |
| Cracked crusher frame or jaw | Gouge, rebuild, and weld to documented procedure |
| Worn liners / chutes / hoppers | Hardface or replace wear surfaces |
| Cracked plant structure / boom | Structural repair to recognised practice |
| Plant that cannot stop | On-site mobile welding to cut downtime |
How We Repair Mining Equipment
- Site survey & failure assessment — inspect, advise hardface / repair / rebuild, price from survey.
- Procedure & material selection — right filler and hardfacing alloy, documented procedure.
- Repair, hardface or rebuild — on site with mobile welding or in the workshop.
- Inspect & hand back to service — checked, dressed, fit for work.
Welded Right & Built to Last
- Welder qualification to ISO 9606 and welding quality management to ISO 3834
- Structural plant repairs to recognised structural practice — AWS D1.1 / execution to EN 1090 where the job is structural
- Hardfacing and procedure selection matched to the wear and impact the part takes — not a guess with whatever rod is on the truck
- Over 15 years in the trade — a real workshop with qualified welders and mobile on-site capability
What It Costs — Honestly
Mining equipment repair is not a flat catalogue price — it depends on the component, the extent of wear or cracking, whether it is hardfaced in place or rebuilt, and whether the work is on site or in the workshop. We price it on a survey, never down the phone. The honest comparison is repair against downtime and replacement cost — which is usually why hardfacing and rebuild win.
Mining Repair Across Ghana
We survey, repair, and hardface at mines and quarries across Obuasi, Tarkwa, Damang, Ahafo, Prestea, and the Western Region goldfields, plus quarry and aggregate plant around Accra, Tema, and Kumasi. On-site mobile welding comes to the plant where downtime demands it.
Areas We Serve
Welders Ghana repairs and hardfaces mining and quarry equipment across Ghana — Obuasi, Tarkwa, Damang, Ahafo, Prestea, the Western Region goldfields, and quarry plant around Accra, Tema, and Kumasi — plus Takoradi.
Related Services
- On-Site Welding — mobile welding brought to the mine or quarry
- Welding & Equipment Repair — cracked, worn, or failed metalwork fixed
- Structural Welding — frames, booms, and plant structure
- Welding Cost Guide — what drives the price, and why we survey
Frequently Asked Questions
Can you repair mining equipment on site to cut downtime? Yes — where a component cannot easily come off or the mine cannot stop, we bring mobile welding to site and hardface, crack-repair, or rebuild in place. Where the workshop is better we turn it around fast. Downtime is the whole point.
What is hardfacing and when do I need it? Hardfacing is a weld deposit of wear-resistant alloy laid onto bucket lips, wear plate, crusher liners, and ground-engaging tools. It extends working life and lets you rebuild a worn part instead of buying new. We match the deposit to the wear.
Do you weld high-strength and abrasion-resistant steels? Yes — wear plate and structural mining grades need the right procedure, pre-heat where called for, and the right consumable, or the weld cracks. Our welders are qualified to ISO 9606 and we weld to a documented procedure.
How much does a mining equipment repair cost? It depends on the component, the extent of wear or cracking, on-site versus workshop, and hardface versus rebuild — so we price it on a survey. The right comparison is repair against downtime and replacement cost.