Custom Metal Fabrication
Custom steelwork made to your drawings — plate, sections, frames, jigs, brackets, and platforms cut, welded, and finished by qualified welders. Welders Ghana fabricates and galvanises custom metal across Greater Accra, priced on a site survey. For over 15 years.
Custom steelwork made to your drawings — plate, sections, frames, jigs, brackets, platforms, and housings, cut, welded, and finished by qualified welders. Welders Ghana fabricates and galvanises custom metal across Greater Accra, for over 15 years. Call +233 27 011 3729 — send a drawing or describe the part and we will arrange a site survey.
Why Custom Fabrication Needs a Real Workshop
A custom part has to fit, line up, and hold — which means accurate cutting, clean welds, and the right finish for where it lives. We work from your drawing, sample, or a survey, cut plate and sections to size, weld and assemble by welders qualified to ISO 9606, and galvanise or coat the part against Accra’s coastal rust. We make one-offs, small batches, and repeat jigs and brackets for commercial clients, and run a same-day on-site line for urgent fabrication and repair.
Custom Metalwork We Fabricate
Plate & Section Fabrication
Mild steel, stainless, and aluminium plate and section — cut, formed, drilled, and welded to your drawing for frames, housings, hoppers, tanks, and brackets.
Frames, Stands & Platforms
Equipment frames, stands, access platforms, walkways, and supports — fabricated square and true, galvanised or coated for the working environment.
Jigs, Brackets & Fixtures
Production jigs, fixtures, brackets, and repeat parts — made to a sample or drawing, consistent across the batch.
On-Site Fabrication & Modification
Modifications, brackets, and fit-ups fabricated and welded on site with mobile welding where the part cannot come to the workshop.
What We Fabricate
| You need | What we do |
|---|---|
| Part from your drawing | Cut, weld, finish to the drawing or sample |
| Frame / stand / platform | Fabricate square and true, galvanise or coat |
| Plate / tank / hopper | Cut and weld plate to spec, finish for the job |
| Jigs & brackets | One-off or small batch, consistent across the run |
| Urgent on-site work | Fabricate and weld on site with mobile welding |
How We Fabricate a Part
- Drawing, sample or survey — we work from your drawing, sample, or a site survey.
- Cut & prepare material — plate and sections cut and edges prepared accurately.
- Weld & assemble to spec — welded square and true by welders qualified to ISO 9606.
- Finish, galvanise & deliver — galvanised, primed, or powder-coated against coastal rust.
Standards & Compliance
- Welder qualification to ISO 9606, welding-quality management to ISO 3834
- Structural fabrication welded to AWS D1.1 and executed to EN 1090 (parts 1 and 2) where the part carries load
- Hot-dip galvanising, primer, or powder-coat — the finish that beats Accra’s coastal corrosion
- Over 15 years in the trade — a real workshop with qualified welders, not a roadside operation
What It Costs
Custom fabrication is not a flat price — it depends on the material, gauge, amount of welding and machining, finish, and quantity. We price on the drawing or a site survey and give you a firm figure for your part, never a guess down the phone.
Custom Fabrication Across Ghana
We fabricate and deliver across East Legon, Spintex, Tema, Adenta, Madina, Achimota, Airport Residential, Cantonments, Dzorwulu, and the Tema industrial area — plus Kumasi and Takoradi. We make commercial one-offs, batches, and repeat parts, and run a same-day on-site response line for urgent fabrication and repair.
Areas We Serve
Welders Ghana fabricates custom metalwork across Greater Accra — East Legon, Spintex, Tema, Adenta, Madina, Achimota, Airport Residential, Cantonments — plus Kumasi and Takoradi.
Related Services
- Structural Steel Welding — beams, columns, and load-bearing frames
- On-Site Welding — we bring fabrication to your site
- TIG Welding Specialty — fine welds in stainless and aluminium
- Gates, Railings & Burglar-Proofing — fabricated and fitted metalwork
Frequently Asked Questions
Can you fabricate from my own drawing? Yes — a drawing, sketch, sample part, or just the dimensions. For structural work we use the engineer’s drawing; otherwise we measure on a survey and confirm the design before cutting steel.
What metals and finishes do you work in? Mild steel, stainless, and aluminium, in plate and section, finished with hot-dip galvanising, primer, or powder-coat depending on where the part lives — the finish is what makes it last near the coast.
How much does custom fabrication cost? It depends on material, gauge, the welding and machining involved, finish, and quantity — so we price on the drawing or a site survey, never a flat figure down the phone.
Do you do one-offs and small batches, plus urgent jobs? Yes — one-offs, small batches, and repeat jigs and brackets, plus a same-day on-site response line for urgent fabrication and repair that cannot wait for the workshop.