Structural Steel Welding
Beams, columns, trusses, and connections welded by qualified welders — Welders Ghana fabricates and erects structural steel for buildings and frames across Greater Accra, to AWS D1.1 and EN 1090 with NDT where the job demands it, priced on a site survey. For over 15 years.
Beams, columns, trusses, base plates, and connections — Welders Ghana fabricates and erects structural steel for buildings and frames across Greater Accra, welded by qualified welders to AWS D1.1 and EN 1090, for over 15 years. Call +233 27 011 3729 — send the drawings or describe the frame and we will arrange a site survey.
Why Structural Steel Welding Is Different
Structural steel holds a building up — the welds carry load, and a weld that fails is not a cosmetic problem. That is why structural work is welded by welders qualified to ISO 9606, to joint standards like AWS D1.1 and EN 1090, inspected and where needed tested by NDT, and built from the engineer’s drawings rather than guessed on site. We fabricate new frames and connections for commercial buildings, and we run a same-day on-site line for structural repairs that cannot wait.
Structural Steel We Fabricate & Erect
Beams & Columns
Universal beams and columns cut, drilled, and welded to size — base plates, cap plates, and stiffeners fabricated and fitted, set plumb and levelled on erection.
Trusses & Roof Frames
Welded steel trusses, portal frames, and roof structures — fabricated in sections in the workshop and erected and connected true on site.
Connections & Gussets
Cleats, gussets, brackets, base-plate and beam-to-column connections — bolted or site-welded to the engineer’s detail, full-strength and square.
Structural Repairs & Strengthening
Cracked welds, corroded members, failed connections, and added supports — repaired or strengthened on site with mobile welding where the structure allows.
What We Fabricate & Erect
| You need | What we do |
|---|---|
| New building frame | Fabricate beams, columns, trusses to spec; erect true |
| Beam / column members | Cut, drill, weld to AWS D1.1 / EN 1090 |
| Connections & base plates | Bolted or site-welded to the engineer’s detail |
| Weld testing | Visual inspection plus NDT where the spec requires |
| Structural repair | Cracked welds and failed members fixed, on site where possible |
How We Build a Structural Frame
- Read the drawings & survey — we work from the engineer’s spec and a site survey.
- Fabricate members to spec — cut, drilled, and welded by welders qualified to ISO 9606.
- Inspect, test & treat — visual inspection, NDT where required, then coat or galvanise.
- Erect & connect on site — set plumb, levelled, and connected square and load-ready.
Standards & Compliance
- Welder qualification to ISO 9606, welding-quality management to ISO 3834
- Structural welding to AWS D1.1, steel execution to EN 1090 (parts 1 and 2) where the project calls for it
- Non-destructive testing (visual, dye-penetrant, ultrasonic) on structural welds where the load or spec demands, with inspection records
- Over 15 years in the trade — a real workshop with qualified welders, not a roadside operation
What It Costs
Structural steel is not a flat per-kilo price — it depends on the tonnage, member sizes, connection complexity, erection access, and finish. We price on the drawings and a site survey and give you a firm figure for your frame, never a guess down the phone.
Structural Steel Across Ghana
We fabricate and erect across East Legon, Spintex, Tema, Adenta, Madina, Achimota, Airport Residential, Cantonments, Dzorwulu, and the Tema industrial area — plus Kumasi and Takoradi. We work from engineers’ drawings for commercial and institutional frames, and run a same-day on-site response line for urgent structural repairs.
Areas We Serve
Welders Ghana fabricates and erects structural steel across Greater Accra — East Legon, Spintex, Tema, Adenta, Madina, Achimota, Airport Residential, Cantonments — plus Kumasi and Takoradi.
Related Services
- Custom Metal Fabrication — plate, sections, and custom steelwork
- On-Site Welding — we bring the welding to your structure
- Certified Welding Inspection — weld inspection and NDT
- Pressure Vessel Welding — coded welding for vessels and plant
Frequently Asked Questions
Do you weld structural steel to AWS D1.1 and EN 1090? Yes — structural connections welded to AWS D1.1, with EN 1090 (parts 1 and 2) execution where the project calls for it, by welders qualified to ISO 9606 under ISO 3834 welding-quality management.
Can you carry out NDT on the welds? Yes — where the load, spec, or engineer requires it we arrange visual, dye-penetrant, or ultrasonic testing on structural welds and provide the inspection records.
How much does structural steel welding cost? It depends on tonnage, member sizes, connection complexity, access, and finish — so we price on the drawings and a site survey, never a flat per-kilo figure down the phone.
Do you handle both commercial frames and urgent on-site repairs? Yes — we fabricate and erect new frames, and run a same-day on-site response line for cracked welds, failed connections, and damaged members that cannot wait.